What is Radon?
Radon is a radioactive gas found naturally in the environment. It is produced by the decay of uranium found in soil, rock or water. Radon is invisible, odourless and tasteless and emits ionizing radiation. As a gas, radon can move freely through the soil enabling it to escape into the atmosphere or seep into buildings. When radon escapes from bedrock into outdoor air, it is diluted to such low concentrations that it poses a negligible threat to health. However, if a building is built over bedrock or soil that contains uranium, radon gas can be released into the building through cracks in foundation walls or, floors, or gaps around pipes and cables.
When radon is confined to enclosed or poorly ventilated spaces, it can accumulate to high levels. Radon levels are generally highest in basements and crawl spaces because these areas are nearest to the source and are usually poorly ventilated.
How Often Should I Change the Air Filter in my System?
Check it at least every month during peak use, and replace it when it looks dirty enough to significantly impair the air flow through it. Some filters, such as media filters or electronic air cleaners, are washable; others are disposable and must be replaced.
What is the Best Type of System to Meet all Indoor Comfort Needs?
The best system depends on many variables, including family size, house location and design, and utility cost and availability. The optimum indoor comfort system might include high efficiency central air conditioning and heating, a high-efficiency air cleaner, and a central humidifier.
On What Heating and Cooling Products Would I Find the EnerGuide Rating?
The EnerGuide Rating label on heating and cooling products sold in Canada can be found at the back of product brochures for: gas and propane furnaces residential air conditioning systems air-to-air heat pumps.
Can Homeowners Repair their Own Air Conditioners?
In most cases, definitely not. Cooling systems today are more complicated to service and usually require expert attention in order to comply with federal regulations, such as the Clean Air Act which prohibits releasing refrigerants into the atmosphere. An EPA-certified air conditioning contractor or service technician should be called at the first sign of trouble.
What is the Average Life of a Central Air Conditioning System?
It can vary, depending on how much the system is used and how regularly it is checked or serviced. Generally, the average life of cooling units built in the 1970s and 1980s is about 15 years, but individual units may vary and last much longer, depending on use and how well they are maintained. Heat pumps have about the same life span– an ARI survey showed average heat pump life to be about 14 years when recommended maintenance procedures were followed. Newer units are expected to last even longer.
Geothermal – The Basics
Looking for an efficient, cost effective, and environmentally-friendly heating/cooling system? A geothermal heat pump is the greenest way to go. Learn the facts about geothermal energy.
- An EPA study of energy efficiency concluded geothermal energy is the most environmentally friendly heating/cooling system
- It has been proven that geothermal energy is more efficient and cost-effective when compared with conventional residential systems
- Geothermal energy can be found underground virtually anywhere
- Geothermal cost savings can be increased by geothermal energy incentives, available from federal, provincial, local, and utility sources
- Energy and cost savings of geothermal heat pumps will vary by region and type of conventional system they’re compared with. Ultimately, the energy cost of geothermal versus conventional HVAC systems will almost always be lower — and the geothermal system will be greener
Geothermal Loop Systems save you money!
At the heart of a geothermal system is the earth loop. This earth loop is the vehicle that transfers heat to or from the ground, distinguishing geothermal from conventional equipment.
Earth loops come in two basic types: closed and open. Closed loops, made of durable plastic pipe, are buried in the earth or submerged in a lake or pond, and transfer heat by circulating a solution through the system.
Open loops use ground water pumped from heat source such as a well. The decision on which loop configuration to use depends on the land terrain, the cost of trenching or drilling, the availability of quality ground water and the availability of land. This technique allows the loop to be placed underneath homes, basements, wooded lots or even swimming pools without disrupting grass or landscaping. Because water transfers heat better than soil, closed loops can be coiled and placed on the bottom of a pond or lake where it transfers heat to or from the water. A 1/2 acre, 8-foot-deep pond is usually sufficient.
Pond or lake loops often require less excavation than vertical and horizontal loops; therefore, they are often less expensive to install. Horizontal Loops are used where adequate land is available. One or more trenches are dug using a backhoe or chain trencher. Pipes are inserted and the trenches are back filled.
|Vertical Loops are installed where space is limited. Holes are bored using a drilling rig, the pipe is inserted, and the holes are filled. The pipes are connected horizontally a few feet below the surface.|
|Horizontal Loops are often used when adequate land surface is available. Depending on geothermal system needs and space available, pipes are placed in trenches that range in length from 100 to 400 feet.|
|Pond Loops can be installed if an adequately sized body of water is located close to the home. A series of coils are sunk to the bottom, connected by a header with supply and return pipes leading to the home.|
Open Loops are used where there is an abundant supply of quality well water. The well must have enough capacity to provide adequate flow for both domestic use and the geothermal system.
Geothermal – How it Works
Ground/water source heat pumps are the most efficient heating and cooling technology available today.
- A ground source heat pump gets its heat from a circuit of pipes buried in the ground. A refrigerant solution circulates through the pipes picking up the natural heat of the earth which is extracted by the heat pump
- A water source heat pump can be used if you have a well, pond, stream or lake. In this case the water is drawn up directly to the pump’s heat exchanger where its heat is extracted and the water is returned to the source
In both cases, the process is reversed in summer when heat and humidity are drawn from the house to provide central air conditioning.
Aside from cutting your heating bills by up to 65% and giving you efficient air conditioning, ground/water source heat pumps can lower your water heating costs on average by 50%, and provide you with free heat for the hot water tank when your air conditioning is operating.
- Compared to electric resistance heating, a ground source heat pump may save you up to 65% on your electrical heating bill, and up to 25% on air conditioning
- Some models also provide water heating
- Check air filters monthly and clean or replace if necessary
- Have a ClimateCare heat pump contractor inspect your unit annually
Higher Energy Efficient Furnaces and Air Conditioning Systems Often Cost More to Buy
Why Would I Want to Buy One?
Buying a high-efficiency furnace, heat pump or air conditioner is an economically and environmentally responsible decision. Equipment with high energy efficiency ratings:
- use less energy, which helps conserve non-renewable resources and contributes to reducing greenhouse gas emissions;
- accumulates savings over its lifetime from lower energy use
- has other advantages: they can cost less to operate, have more efficient motors and fans than standard efficiency systems
- sometimes has a longer and more comprehensive warranty
How are EnerGuide Ratings Determined and who decides what number goes on the rating label?
Like the EnerGuide appliance ratings, the numbers are the results of product testing using energy standards specified by Natural Resources Canada in the Regulations of Canada’s Energy Efficiency Act, and then verified by agencies such as the Canadian Standards Association (CSA).
Why is the EnerGuide Rating for Heating and Cooling Products on the Back of Manufacturer’s Brochures?
Unlike major household appliances, which are usually purchased after the customer has personally examined the various models on the retail floor, furnaces, heat pumps and air conditioning systems are usually sold from brochures or product literature. Therefore, the brochure is the most suitable place to help consumers looking for energy efficiency ratings.
What Does the ENERGY STAR® Logo Mean?
The ENERGY STAR® logo, found on packaging, literature, product advertising and in some cases, products themselves, means that the products are significantly more energy efficient than required under current federal standards. For example, central air conditioning systems with ENERGY STAR® endorsed logos exceed existing federal standards by a minimum of 20 percent, and furnaces with the logo, exceed minimum standards by 15 percent. This means that the products have a higher level of energy efficiency than standard products found on the market today.
By choosing ENERGY STAR® qualifying products, homeowners can use energy more efficiently, save money on utility bills, help make their homes more comfortable and reduce air pollution without sacrificing the features, versatility or style that they expect from high-performing products.
Will I Need a Chimney to Vent the Smoke and Combustion Gases?
For safety reasons, all gas fireplaces should be installed with the proper venting by a professional HVAC contractor. How a fireplace is vented depends on where it is being installed inside your home and if you’re converting a pre-existing wood-burning fireplace to gas.
Venting with a pre-existing chimney – Most masonry chimneys are eight or nine square inches wide – far too large for a gas fireplace. With a space that big, the exhaust would condense and fall back down into the fireplace before it had a chance to be vented outdoors. The old chimney would have to be fitted with an insulated four or five-inch aluminum pipe.
Direct venting (built-in or stand-alone fireplaces) – Built-in and stand-alone gas fireplaces do not require chimneys, but they do have to be vented directly outside. This is usually done through a wall, but when a wall is not available, the fireplace may be vented through the ceiling.
Are There Different Types of Gas Fireplaces?
The following is a brief outline of the four types of gas fireplaces that are generally available. The type you choose depends on your aesthetic preferences, comfort requirements, and whether you already have a wood-burning fireplace that you would like to convert to gas.
Log inserts – A log insert is an artificial gas-burning log that is installed into a pre-existing wood-burning fireplace. The log insert does not provide any useable heat. This is a good option when you have a wood-burning fireplace that you no longer want to actually use but don’t want to get rid of because you like the look of it in the room.
Fireplace inserts – A fireplace insert consists of a fully enclosed gas fireplace that is installed into a pre-existing wood-burning fireplace. This type of fireplace provides enough heat to warm an average-sized living area (25 000 to 40 000 BTU output).
Built-in fireplaces – The built-in gas fireplace is a self-contained fireplace that does not require a pre-existing fireplace structure. It can be installed virtually anywhere in the home. Built-in gas fireplaces are an efficient way to heat even a large living area. Although the actual fireplace itself is a complete unit, it must be framed within a box, called the surround. The surround is then finished in a way that complements the room.
Stand-alone fireplaces – These look more like stoves than fireplaces. In fact, some are styled much like the old-fashioned cast-iron or enamel wood-burning stoves with attractive metal moldings. Unlike wood-burning stoves, stand-alone fireplaces are efficient as well as charming.
Should I Get a Gas or Wood-Burning Fireplace?
Both gas and wood-burning fireplaces have their supporters. People in the wood-burning camp tend to cite the artificial look of a gas fireplace as the main reason why they would never switch to gas. However, many recent models of gas fireplaces have extremely realistic flames and embers. Below are some advantages of a gas fireplace over a wood-burning fireplace:
- No ashes or bits of wood to clean up
- Turns on with the flick of a switch
- Flames are safely enclosed
- Heat can be easily regulated
- Effectively heats large rooms
- Available in a wide variety of styles and sizes
- Installs virtually anywhere in the home.
- Generates ashes and wood bits
- Chimney provides insects with a direct path into your house
- Average time to a roaring fire under perfect conditions is about 15 to 20 minutes
- Creosote can build up in the chimney, creating a serious fire hazard
- Heat given off by a wood-burning fireplace is difficult to regulate
- Wood-burning fireplaces often have negative efficiencies (heated air from the room goes up the flue).
When Do I Know It’s Time to Replace My System?
When the system starts giving you more problems than seem cost-effective to fix, particularly when major components such as the compressor start making unusual noises or otherwise indicating need for a service call. When faced with major repairs, we can help you make the right choice. Replacing a compressor is somewhat less expensive than replacing the entire unit, but new units may give you greater efficiency and lower operating costs in the long run.
Close the Flue on Your Fireplace When Not in Use
Make sure you close the flue or damper on your fireplace when it’s not in use, and that it’s sealed tight. Your home’s warm air can go right up the chimney at the rate of up to 400 cubic feet each minute.
Check the seal on the fireplace damper by closing it off and holding a piece of tissue paper inside the firebox. If drafts blow the tissue around, repair or replace the damper.
Have a certified contractor inspect your chimney annually for blockage or deterioration – moisture stains, cracks, white chalky deposits or loose mortar.
Also please remember that the glass of a gas fireplace heats up to 200° Celsius (400° F) in just 6 minutes and takes 45 minutes to cool down to a safe temperature. Anyone who touches a surface this hot will suffer a serious burn instantly.
It is also important to be aware that the pilot light of a gas fireplace may also heat the glass enough to cause a burn.
How Much Humidity Should You Have in Your Home?
Humidity levels above 20 percent help prevent dry, sore throats and make the air feel warmer and more comfortable. Moist air also eliminates static electricity in the house and helps to protect plants and preserve your furniture.
On the other hand, humidity levels over 40 percent can cause frosting and fogging of windows, staining of walls and ceilings, peeling paint, mould growth and odors. When relative humidity is over 50 percent, airborne diseases become more difficult to control. Condensation on your windows can provide a good indication of the relative humidity. You may, however, want to install a humidity sensor or humidistat to keep more accurate measurements of humidity levels.
How Do I Keep My Housing Structure Dry?
Use four strategies to keep the structure dry:
- Provide exterior weather and moisture protection. Use building paper, siding, flashing, gutters and other construction techniques to shed water and repel wind-driven rain. Pay attention as well to below-grade measures. Proper drainage, grade slope and damp-proofing can protect the foundation from ground-water leaks or from moisture movement by capillary action.
- Reduce moisture at the source. This means producing less moisture in the first place and exhausting moist air and bringing in drier air.
- Prevent moist indoor air from getting into the envelope.A vapour barrier will reduce moisture movement by diffusion, and an air barrier can prevent moisture movement by air leakage. Although less moisture can be moved into the envelope by vapour diffusion than by air leakage, it is still important to provide a vapour barrier. An effective vapour barrier must be the following:
- resistant to vapour diffusion
- installed on the warm side of the insulation
A number of building materials resist vapour diffusion well enough to be used as vapour barriers. These include polyethylene, oil-based paints and special vapour-barrier paints, some insulation materials and exterior-grade plywood. Different materials may act as the vapour barrier in different parts of the house.
The same material may work as both an air barrier and a vapour barrier, provided it meets both requirements and is properly installed. Polyethylene sheets and foil-backed gypsum drywall can both combine these functions. To avoid confusion of terms, we refer to a material doing both jobs as an air and vapour barrier.
As a general rule, the vapour barrier should be on the warm side of the insulation. In some cases, however, the vapour barrier can be located within the wall or ceiling assembly, provided that at least two thirds of the insulation value of the wall is on the cold side of the vapour barrier. Because this ratio should be adjusted for houses with high interior humidity or for homes in extremely cold climates, it is recommended that you consult a professional builder-renovator, who will apply the specifications outlined in the National Building Code of Canada.
- Let the envelope “breathe” to the outside.This will allow the house to deal with seasonal fluctuations in humidity and to release any moisture that does penetrate the envelope from the interior or exterior. The materials of the envelope are layered, with those most resistant to vapour diffusion located on the warm side of the envelope and the least resistant (such as building paper) located on the outside. In this way, any vapour that penetrates the envelope can escape to the outside.Some wall systems work well with a relatively impermeable insulated sheathing because the interior wall-cavity temperatures are kept high. As a precaution, when retrofitting a wall, always ensure that the interior surfaces are vapour-resistant.Some siding applications have an air space immediately behind the exterior finish to promote drying out of materials that have been soaked by rain or dampness. This air space also provides an escape route for any moisture that has penetrated the wall cavity from the indoors. This type of installation should not be used with insulated siding, as convection in the air space will negate the effect of the insulated backer board on the siding.
What are Sources of Moisture in the Home?
Even if your house has no leaks in the basement or roof and is apparently dry, it can have moisture problems. Where does all the moisture come from? There are a number of major sources that are not always obvious:
- Occupants and their activities: An average family of four will generate about 63 litres (20 gallons) of water a week through normal household activities.
- Wind-blown rain in walls: Where basement damp-proofing is inadequate, ground water in the soil can migrate through the foundation by capillary action and evaporate on the surface of the wall or floor.
- Damp basements
- Moisture stored in building materials and furnishings: Building materials and furnishings absorb moisture from the air during damp, humid weather and then expel it during the heating season.
Despite all this water produced each day, most older houses have “dry” air in winter to the point where they have to have humidifiers installed. Why?
Cold outdoor air cannot carry much water vapour. In older homes, uncontrolled airflow brings colder, drier air indoors and forces the warm, moist household air out through openings in the upper walls and attic. The air quickly escapes through the un-insulated envelope without cooling down enough to cause condensation.
When insulation is added, the building exterior becomes much colder. Unless additional protection is provided, water can condense in the building structure.
How? Remember that cold air is able to hold much less moisture than warm air. As the warm, moist air cools in the cold outer layers of the building, the water vapour it holds may condense as liquid or, if it is cold enough, as frost. This can reduce the effectiveness of insulation and even cause rot, peeling paint, buckled siding, mould growth and other problems.
Why You Should Control Moisture Flow?
We must control moisture in all its forms to keep our homes durable and comfortable. Building components and practices such as flashing, roofing and basement damp-proofing successfully protect the home from liquid water.
It is equally important to control the movement of water vapour, providing added protection for the house structure and helping to maintain indoor humidity at a comfortable level.
Controlling moisture involves three strategies:
- using construction techniques that keep moisture away from the structure
- producing less moisture
- exhausting excess moisture